Yanık

The battery does not have a device that monitors the cells' temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns. The product does not comply with the requirements of the Low Voltage Directive and of the European standards EN 60335 and EN 62133.

The battery does not have a device that monitors the cells temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns. In addition, the power cords, which are exposed to movement between the two motors, are routed through a steel pipe with burr edges at both ends. During the life of the product, the insulation of the power cords can be damaged by the sharp edges, the battery may short-circuit and explode during use. As a result, the user might lose control and fall off the scooter and suffer injuries. The product does not comply with the requirements of the of the Low Voltage Directive and of the European standards EN 60335-1, EN 60335-2 and EN 62133.

The battery does not have a device that monitors the cells temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns. In addition, the power cords, which are exposed to movement between the two motors, are routed through a steel pipe with sharp edges at both ends. During the life of the product, the insulation of the power cords can be damaged by the sharp edges, the battery may short-circuit and explode during use. As a result, the user might lose control and fall off the scooter and suffer injuries. The product does not comply with the requirements of the relevant European standards EN 60335 and EN 62133.

The battery does not have a device that monitors the cells temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns. Furthermore, the dimensions of the socket outlet of battery charger are not suitable. The user could touch the accessible live parts and receive an electric shock.In addition, the power cords, which are exposed to movement between the two motors, are routed through a steel pipe with burr edges at both ends. During the life of the product, the insulation of the power cords can be damaged by the sharp edges, the battery may short-circuit and explode during use. As a result, the user might lose control and fall off the scooter and suffer injuries. The product does not comply with the requirements of the Low Voltage Directive and of the relevant European standards EN 60335-1, EN 60335-2 and EN 62133-2.

The battery does not have a device that monitors the cells temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns.Furthermore, the dimensions of the socket outlet and the flat plug and the insulation between the primary and secondary sides of battery charger are not suitable. The user could touch the accessible live parts and receive an electric shock.In addition, the power cords, which are exposed to movement between the two motors, are routed through a steel pipe with burr edges at both ends. During the life of the product, the insulation of the power cords can be damaged by the sharp edges, the battery may short-circuit and explode during use. As a result, the user might lose control and fall off the scooter and suffer injuries. The product does not comply with the requirements of the Low Voltage Directive and of the relevant European standards EN 60335-1, EN 60335-2 and EN 62133-2.

The landing platform is too small. Consequently, children climbing the pyramid may fall and land outside the soft landing platform, on the ground and suffer injuries. Furthermore, the material does not resist to fire, it does not stop burning when the ignition source is removed and it burns rapidly. As a result, there is a risk of fire and burns. The product does not comply with the requirements of the General Product Safety Directive and European standard EN 14960-1.

The battery does not have a device that monitors the cells temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns.In addition, the product featured poor quality as the power cords, which are exposed to movement between the two motors, are routed through a steel pipe with burr edges at both ends. During the life of the product, the insulation of the power cords will be damaged by the sharp edges to such that in the battery may short-circuit occurs and explodes during use. As a result, the user might lose control and fall off the scooter and suffer injuries. The product does not comply with the requirements of the Low Voltage Directive and of the relevant European standards EN 60335-1, EN 60335-2 and EN 62133-2.

The product does not resist to fire, it does not stop burning when the ignition source is removed and it burns rapidly. As a result, there is a risk of fire and burns. The product does not comply with the requirements of the General Product Safety Directive and European standard EN 14960-1.

The product does not resist to fire, it does not stop burning when the ignition source is removed and it burns rapidly. As a result, there is a risk of fire and burns. The product does not comply with the requirements of the General Product Safety Directive and European standard EN 14960-1.

The battery does not have a device that monitors the cells temperature, hence it may overheat during charging, and the hoverboard cover may ignite. The product may cause a fire and the user may suffer burns. In addition, the power cords, which are exposed to movement between the two motors, are routed through a steel pipe with burr edges at both ends. During the life of the product, the insulation of the power cords will be damaged by the sharp edges to such that in the battery may short-circuit occurs and explodes during use. As a result, the user might lose control and fall off the scooter and suffer injuries. The product does not comply with the requirements of the Low Voltage Directive and of the relevant European standards EN 60335-1, EN 60335-2 and EN 62133-2.