Son bildirimler

There is no sufficient technical documentation for the product and no evidence of production control. In the absence of evidence to demonstrate the conformity of the product, it may be possible for it to overheat and catch fire. Furthermore, the product was supplied with an additional non-compliant two-pin plug, which could lead to overheating and fire. The product does not comply with the requirements of the Machinery Directive.

The weight collars can fail to grip the dumbbell bar securely during use. This could result in weight plates coming loose or sliding off, particularly under vertical loading, leading to injuries. The product does not comply with the General Product Safety Regulation.

The adhesive bond between the closure strips and the bag film. As a result, the closure strips may detach partially or completely during use, causing the product to lose its intended function and potentially releasing the enclosed magnets. The magnets constitute small parts. A child can put them in the mouth and choke. Moreover, if a child swallows them, they could attract one another causing intestinal blockage or perforation. The product does not comply with the General Product Safety Regulation.

The UVA-A and AV-B radiation is not sufficiently filtered, posing possible eye damage to the wearer. Moreover, the goggles’ compressive strength is insufficient. The eyecups and strap retainers break, leading to injuries. The product does not comply with the Personal Protective Equipment Regulation (PPE).

The strength and the effectiveness of the helmet are inadequate. In the event of an impact, users may suffer head injuries, due to displacement. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 1078.

The product is marketed and packaged as a “life jacket”, despite being identified within the product documentation and markings as a 50N buoyancy aid. A buoyancy aid does not provide the same level of protection as a life jacket and requires active participation from the wearer to remain afloat, whereas a life jacket is designed to provide face-up flotation without user intervention. The misleading description may cause consumers to overestimate the level of protection offered and use the product in circumstances for which it is not suitable, increasing the risk of drowning. The product does not comply with the Personal Protective Equipment Regulation (PPE).

The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 39.54% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.

Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. There is a risk of drowning if children play with it unsupervised. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138-3.

The plastic material of the product contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to: 28.85 % and 0.41% by weight, respectively).These phthalates may harm the health of children, causing possible damage to their reproductive system.Moreover, the product has an excessive concentration of short chain chlorinated paraffins (SCCPs) (measured value up to 2.65% by weight).SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.

There is no evidence that the product has been assessed using relevant conformity assessment procedures. There is no valid technical documentation for the product and no evidence of production control. Furthermore, there is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the product, it may be possible for it to overheat and catch fire. The product does not comply with the requirements of the Machinery Directive.

A manufacturing defect in the second-stage spindle assembly may restrict the flow of breathing gas at depths exceeding 45 metres. As a result, the regulator may not supply sufficient breathing gas when required, which could lead to drowning. The product does not comply with the Personal Protective Equipment (PPE) Regulation.

The dark blue plastic material of the product contains an excessive concentration ofbis(2-ethylhexyl) phthalate (DEHP) (measured value: 0.17 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH regulation.

The red plastic material of the product contains an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 15.4% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.

The plastic material of the foot straps has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 14% by weight). This phthalate may harm the health by causing possible damage to reproductive system. The product does not comply with the REACH Regulation.

The plastic material of the product has an excessive concentration of diisobutyl phthalate (DIBP) (measured value 0.15% by weight). This phthalate may harm the health by causing possible damage to the reproductive system and may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.

The plastic material of the product has an excessive concentration of diisobutyl phthalate (DIBP) (measured value: 37.83% by weight).This phthalate may harm the health by causing possible damage to the reproductive system and may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.

The product is supplied with an attachable canopy. In windy conditions, the canopy could cause the product to lift from the water. The child could fall from the product and be injured by impact or by drowning in the water. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138-3.

The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138-3.

Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. There is a risk of drowning if children play with it unsupervised. The product does not comply with the General Product Safety Regulation.

The electric motorbike and its components have not been assessed using relevant conformity assessment procedures. There is no valid technical documentation for the product and no evidence of production control. There is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the bike, battery, and charger, it may be possible for the charger and/or battery to overheat, causing a fire. The product does not comply with the requirements of the Machinery Directive.

The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138.

The plastic material of the product has an excessive concentrations of dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: up to 41.94% and 0.62% by weight, respectively).This phthalate may harm the health by causing possible damage to the reproductive system and may harm the health of children, causing possible damage to their reproductive system.SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.

There is no valid technical documentation for the product and no evidence of production control. There is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the product, along with the supplied charger and plug, it may be possible for the product to overheat and catch fire. The product does not comply with the requirements of the Machinery Directive.

The product is supplied with a two-pin plug that cannot incorporate a fuse. In the event of a fault or overcurrent, there is no adequate protection, which may lead to overheating and a risk of fire. The product does not comply with the requirements of the Machinery Directive.

The product is supplied with a plug without a fuse. Without this protection, a fault could cause the plug to overheat or explode, creating a risk of fire. The product does not comply with the requirements of the Machinery Directive.

The plastic material of the toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DIBP) (measured values up to 0.06% and 0.05% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.

The product is supplied with a plug without fuse link and the adaptor provided with is not suitable. The user could therefore receive an electric shock and the product could cause a fire when charging. The product does not comply with the requirements of the Machinery Directive.

The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138.

The electric bicycle and its components have not been assessed using relevant conformity assessment procedures. There is no valid technical documentation for the product and no evidence of production control. There is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the bike, battery, and charger, it may be possible for the charger and/or battery to overheat, causing a fire. Additionally, the product was not supplied with a battery. If a consumer purchases and uses a non-compatible battery, it may overheat and cause a fire. The product does not comply with the requirements of the Machinery Directive.

The product has not undergone the required conformity tests for personal protective equipment category III. The product might not function properly when it is used in the water, causing the user to drown. The product does not comply with the Personal Protective Equipment Regulation (PPE).

There is a defect in the wire gate riveting on these carabiners. This assembly fault could cause the gate to break or detach, posing a risk of carabiner failure in the event of a fall, leading to injuries. This product does not comply with Personal Protective Equipment (PPE) Regulation.

The welding is not sufficiently strong. The frame can therefore break apart due to the weakness at the centre of the bicycle frame. This could cause the rider to fall, which could lead to injuries. The product does not comply with the requirements of the Machinery Directive.

The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 24.7% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. Moreover, the plastic of the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs)(total measured value 7.35 mg/kg). These PAHs may cause cancer. The product does not comply with the REACH Regulation.

The strength and the effectiveness of the helmet are inadequate. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.

The strength and the effectiveness of the helmet are inadequate. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.

Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. There is a risk of drowning if children play with it unsupervised. The product does not comply with the General Product Safety Regulation.

The gate of the carabiner can malfunction and may not close automatically. This creates a risk of unintended detachment during use, which could result in a fall from height. This product does not comply with Personal Protective Equipment (PPE) Regulation.

The product presents a serious risk of injuries as it is supplied with an attachable canopy. In windy conditions, the canopy could cause the product to lift from the water. The child could fall from the product and be injured by impact or by drowning in the water. The product does not comply with the General Product Safety Regulation.

Due to a structural failure, the handle bar can easily break. This could cause an accident and injuries. The product does not comply with the General Product Safety Regulation nor with the European standards EN ISO 4210.

The two-pin plug does not incorporate a fuse. In the event of a fault or overcurrent, there is no adequate protection, which may lead to overheating and a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Floating seats with leg openings must not have any overwater structures. In windy conditions, the float may be lifted, tipped over, pushed away, or destabilised, creating risks of falls, capsizing, separation from the caregiver, entrapment, or drowning. The product does not comply with the General Product Safety Regulation

The supplied plug does not have capacity for a fuse, which is required for safe operation under fault conditions. This could cause the plug to overheat, posing a risk of fire. Improvements are also required to product documentation and marking. The product does not comply with the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

The supplied plug does not have capacity for a fuse, which is required for safe operation under fault conditions. This could cause the plug to overheat, posing a risk of fire. Improvements are also required to product documentation and marking. The product does not comply with the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

The supplied plug does not meet dimensional requirements and does not have capacity for a fuse, which is required for safe operation under fault conditions. These could cause the adaptor or plug to catch fire or explode, posing a risk of fire. The product does not comply with the requirements of the Machinery Directive.

The supplied plug does not incorporate a fuse, which is required for safe operation under fault conditions. This could cause the plug to overheat, posing a risk of fire. Improvements are also required to product documentation and marking. The product does not comply with the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138.

The supplied plug does not meet dimensional requirements and does not have capacity for a fuse, which is required for safe operation under fault conditions. Moreover, the earth pin of the adaptor is not sufficient. These could cause the adaptor or plug to catch fire or explode, posing a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.

The product resembles a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not meet the requirements of the General Product Safety Regulation nor with the European standard EN 13138.